Replacing a central air conditioner typically costs $6,000 to $12,000 installed in 2026 for an average home, with most homeowners paying around $7,500 to $9,000 for a mid-efficiency 3-ton system. High-efficiency variable-speed systems can reach $14,000 or more, and replacing the AC together with a furnace usually costs $10,000 to $20,000.
Prices have risen in the last few years because of the switch to new refrigerants, stricter efficiency standards and higher equipment costs. Here’s what drives the price and how to judge a quote.
Last updated: October 2026. Prices are typical U.S. ranges compiled from published contractor pricing and industry cost guides. Get at least three written quotes.
Central AC replacement cost by size
| System size | Typical home size* | Installed cost (mid-efficiency) |
|---|---|---|
| 1.5 to 2 tons | 800 to 1,300 sq ft | $5,000 to $8,500 |
| 2.5 tons | 1,200 to 1,600 sq ft | $5,500 to $9,000 |
| 3 tons | 1,500 to 1,900 sq ft | $6,000 to $10,000 |
| 3.5 to 4 tons | 1,800 to 2,500 sq ft | $7,000 to $11,500 |
| 5 tons | 2,400 to 3,000 sq ft | $8,000 to $13,000 |
*Varies by climate and insulation. Use our AC size chart and insist on a Manual J load calculation.
These prices usually include the outdoor condenser, a matching indoor evaporator coil, refrigerant line connections, a new pad, the thermostat connection, removal of the old unit and basic labor.
Cost by efficiency (SEER2)
| Efficiency | Type | Added cost vs. base model |
|---|---|---|
| 13.4 to 15 SEER2 | Single-stage (federal minimum range) | Base price |
| 15 to 17 SEER2 | Two-stage | +$1,000 to $3,000 |
| 18 SEER2 and up | Variable-speed (inverter) | +$3,000 to $6,000 |
Federal minimums since 2023 are about 13.4 SEER2 in northern states and 14.3 SEER2 in southern states for most residential sizes. Higher-efficiency systems cost more up front but lower monthly bills and handle humidity better. They pay off fastest in hot climates where the AC runs many hours a year.
Other costs that can be added
| Item | Typical cost |
|---|---|
| Ductwork repair or sealing | $500 to $3,000 |
| Full ductwork replacement | $3,000 to $10,000+ |
| Electrical upgrades (new circuit, disconnect) | $200 to $1,500 |
| Permit and inspection | $50 to $500 |
| New smart thermostat | $150 to $500 |
| New furnace or air handler (if needed) | $3,000 to $8,000 |
| Removal of an R-22 system | Often included; ask |
AC vs. AC + furnace vs. heat pump
| Option | Typical installed cost |
|---|---|
| Central AC only | $6,000 to $12,000 |
| AC + gas furnace | $10,000 to $20,000 |
| Heat pump (heating and cooling) | $8,000 to $16,000 |
| Ductless mini split (per zone) | $3,500 to $7,000 |
If your furnace is also more than 15 years old, replacing both together usually saves on labor and ensures matched equipment. In many climates, a heat pump can replace both the AC and part or all of the furnace’s job; see our heat pump vs. furnace comparison.
What affects the price
- Brand tier. Premium brands cost more; the quality of the installation matters more than the brand.
- Refrigerant. New systems use R-454B or R-32. See our R-410A phase-out guide.
- Location and labor rates. Large metros and the coasts are usually more expensive.
- Installation difficulty. Attic air handlers, long line sets and tight spaces add labor.
- Season. Spring and fall often bring better scheduling and occasional discounts compared with peak summer.
Rebates and tax credits in 2026
The federal Energy Efficient Home Improvement Credit (Section 25C), which offered up to $2,000 for qualifying heat pumps and up to $600 for central AC, ended for equipment installed after December 31, 2025 (details). For 2026 installations, check:
- Your electric or gas utility. Many offer rebates for high-efficiency AC and heat pumps.
- State energy programs, including state-run home energy rebate programs where available.
- Manufacturer promotions, often seasonal.
How to get a fair quote
- Get at least three written quotes from licensed, insured contractors.
- Ask each for a Manual J load calculation.
- Compare model numbers, SEER2 ratings, warranty terms and what’s included, not just the total.
- Confirm the indoor coil is being replaced and matched to the outdoor unit (check the AHRI certificate).
- Ask about the labor warranty, separate from the manufacturer’s parts warranty.
- Register the equipment with the manufacturer after installation to get the full parts warranty.
Is it time to replace?
Consider replacing if your AC is 12 to 15 years old or more, uses R-22, needs a compressor or major refrigerant repair, or can no longer keep up. For a smaller repair on a younger system, repair usually makes more sense. See AC repair cost and our repair vs. replace guide.
Frequently asked questions
How much is a new 3-ton AC unit installed?
Typically $6,000 to $10,000 for a mid-efficiency system, depending on brand, efficiency and installation complexity.
How long does a central AC last?
Usually 12 to 15 years, sometimes longer with good maintenance and in milder climates.
Should I replace my AC and furnace at the same time?
If the furnace is more than 15 years old, often yes. You save on labor and get matched, compatible equipment.
Can I finance a new AC?
Many contractors and manufacturers offer financing. Compare the interest rate and total cost to a personal loan or home equity option.
Disclaimer: prices are estimates for general information and are not quotes. Actual costs depend on your home, location and contractor.